What are the two modes on the Tow-Pro Link and when to use them

This information is applicable to the following products:

• Tow-Pro Link Brake Controller (EBRHX-ADH, EBRHX-ADH-NA) 

Everyday Mode (Blue)

When Everyday (proportional) mode is enabled, the LED is blue.

Everyday (proportional) mode is ideal for highway travel and general use on road surfaces, including dirt and gravel. Once the Braking Force is set at the beginning of each trip, this mode requires minimal input from the user whilst travelling.

In this mode, the trailer will brake at a level proportional to the vehicle deceleration. Simply put, the harder the vehicle brakes are applied, the harder the trailer will brake. The Braking Force setting (0 to 10), will set the trailer brakes from a lighter to a heavier brake application.

Manual Off-Road Mode (Green)

When Manual Off‑Road (user controlled) mode is enabled, the LED is green.

Manual Off‑road (user controlled) mode is best for experienced drivers that need precision control on surfaces like mud and sand and in rocky terrain. It may require frequent adjustment throughout the trip as ground surfaces change.

In this mode, the trailer will brake at the level set on the Remote regardless of how hard the vehicle brakes. The Braking Force setting (0 to 10), will set the trailer brakes from a lighter to a heavier brake application.

How to change the mode using the USB remote

1. Ensure your vehicle is stationary.
2. Press and hold the brake pedal.
3. Press and hold the Minus and Plus Buttons at the same time for approximately 5 seconds until the LEDs change to the new mode colour.
4. Release the brake pedal.