Important
For your safety, REDARC recommends installation by a qualified technician. Seek support from a REDARC recommended dealer or installer - Find Your Local Installer
This information is applicable to the following products:
- G52-VA
- G52-VWA
I cannot get the relay output feature to work.
The G52-VA and G52-VWA gauges are not equipped with a relay output feature. All other gauges within the range include this feature.
Can I re-program the alert levels on my voltage gauge?
No - the alert levels are programmed when manufactured. The G52-VA will trigger at 9 & 16V and the G52-VWA at 11 & 16V.
I cannot get the 'peak hold' feature to work.
The G52-VA and G52-VWA gauges are not equipped with the peak hold feature. All other gauges within the range include this feature.
This information is applicable to the following products:
- G52-VA
Why is the centre ring is flashing?
The “Master battery” setting should be set to ‘none’.