Articles in this section

How to install a brake controller without affecting braking systems

Important

For your safety, REDARC recommends installation by a qualified technician. Seek support from a REDARC recommended dealer or installer - Find Your Local Installer

The EPDK-001 Encapsulated Protection Device has been designed to fit in the Trailer Stop Lamp feed to support the installation of Tow-Pro Electric Brake Controllers on vehicles where ‘back-feed’ of 12 V (during Tow-Pro Manual Override) may interfere with the vehicle systems.

When installed correctly, the EPDK ensures correct Trailer braking and Stop Lamp operation when the vehicle brakes or the Tow-Pro Manual Override is used.

Download the full instructions here.

Was this article helpful?
0 out of 0 found this helpful